email 이메일 :  Info@miraclepwb.com
call 전화 :  + 86-755-85246345
search icon
/ 블로그/ 알루미늄 PCB 제조 : 2020 년 전체 개요

알루미늄 PCB 제조 : 2020 년 전체 개요

2020-05-27

A Brief Introduction to Aluminum PCB Manufacturing

Aluminum PCB manufacturing is the increasing trend in the modern Printed Circuit board industry. Their high thermal conductivity and better performance make them the first choice for electronics that require high heat dissipation.

Your choice of Printed Circuit Board would greatly impact the future of your electronics. Therefore, you need to make the right decision, the first time. Once incorporating the Printed Circuit Board, make changes would cost you greatly.

There are several types of Printed Circuit Boards out there, each type catering a certain category of electronics. We are not going to talk about a different type of PCB, on the contrary, our focus would be on a particular type of PCB- Aluminum PCB.

Aluminum Printed Circuit Board: Introduction

Aluminum PCB manufacturers generate aluminum alloy after several heat treatments and pre-drawing processes. These steps are imperative to ensure the quality of Aluminum alloy. You cannot compare its strength with either the 2XXX system or the 7XXX system.

However, manufacturers do enjoy the processing performance, electroplating characteristics, welding power, and corrosion-resistant of its silicon and magnesium alloy. Furthermore, it offers toughness, compact material, no deformation and defect-free material.

Polishing and coloring are also easy and efficient. The amazing oxidation effect further adds to its appeal.

Aluminum PCB manufacturing

Aluminum PCB Manufacturing: Structure of Aluminum PCB

The copper-clad laminate (CCL) is the basis of the aluminum PCB structure. It consists of the aluminum membrane, aluminum base, dielectric layer, and the copper foil. In the picture below, you can see the structure of the copper-clad laminate.

Copper Foil layer

The Aluminum CCL has the same copper foil layer as that of any other type of PCC’s CCL. It is the current’s objective to provide a large current carrying capacity. Due to this, choosing a thick copper circuit is a good decision in aluminum PCB 제조.

Generally, the manufacturer prefers the thickness between 1oz to 10oz. It is important for the copper foil’s backside to go through different oxidation treatment. The treatment involves chemicals as well.

Likewise, the front side goes through brass plating and zincing. The main reason for front treatment is to improve the peel-off strength of the aluminum Printed Circuit Board.

Dielectric Layer

The next layer, is the dielectric layer. It compromises of a composed thermal dielectric material. This material has a low thermal resistance. Generally, it has a thickness ranging from 50μm to 200μm. The thickness depends upon the type of the Printed Circuit Board and the consumer’s demand.

This layer seems to be the aluminum Printed Circuit Board core technology. It has the same functionality as that of the anti-thermal aging. Moreover, it has the capacity to withstand thermal stress as well as mechanical stress.

Aluminum Base Layer

When we say aluminum base layer, we actually mean the aluminum substrate. This substrate is supporting all the components present on the board. It binds the components to the board. It is imperative for this substrate to be highly thermally conductive.

Base layer also needs to be suitable for the different mechanical processes including cutting, punching, and drilling.

Base Membrane

The aluminum base pays an important role in the protection of PCB’s aluminum surface. It ensures that the surface is safe from agent etching and scraping. There are two main types of base membrane, first ordinary and second anti-high temperature.

Ordinary membrane usually withstands temperature lower than 120°C. On the contrary, the anti-high temperature can withstand up to 250°C.

The anti-high type is the best choice for hot air solder levelling.

Aluminum PCB Performance

Before is the performance of the aluminum Printed Circuit Board.

Thermal Dissipation

There is no denying that aluminum PCB performs efficiently in terms of thermal dissipation. These Printed Boards have the capability to dissipate heat effectively in comparison to the regular Printed Board.

우리의 요점을 더 설명하기 위해 예를 들어 보겠습니다. FR4 인쇄 회로 기판과 함께 알루미늄 인쇄 기판을 가져 가십시오. 이 두 보드의 두께는 1.5mm입니다. 동일한 두께에도 불구하고 알루미늄 PCB는 1 ° C / W ~ 2 ° C / W의 열 저항을 제공합니다.

반면에 표준 인쇄 회로 기판 은 20 ° C / W에서 22 ° C / W 사이를 제공합니다. 이것은 알루미늄 PCB가 열 발산의 경우 표준 보드보다 훨씬 앞서 있음을 분명히 보여줍니다.

열 팽창

수축과 열팽창은 모든 물질의 특성입니다. 그러나 팽창 및 수축량은 재료에 따라 크게 달라집니다. 재료마다 열팽창 계수가 다릅니다.

Aluminum is an excellent choice in this regard as well. It works smoothly for contraction and the thermal expansion problem of the surface mount technology. These PCBs are completely reliable and they increase the durability of the Printed Board.

After, thermal expansion is a great problem at the aluminum PCB manufacturing end. Resolving this issue would make the Printed Circuit Board robust.

Dimensional Stability

Aluminum PCBs ensure performance because they offer a stable size. Even when you heat the Printed Circuit Board from 30°C up to 150°C the expansion rate is between 2.5% to 3.0%.

Other Performance Factors

If you think that the benefits of Aluminum Printed Circuit Boards end above, you are mistaken. There are several other performance factors that make a good and reliable Aluminum PCB Manufacturer claim. Some of these factors are below.

  • 알루미늄 인쇄 회로 기판은 표면 실장 기술의 전원 장치에 중요합니다.
  • 회로 설계의 확장 측면에서 매우 효율적입니다. 그러면 원하는 장치를보다 안정적이고 효율적으로 만들 수 있습니다.
  • 알루미늄 인쇄 보드는 전체 제품 밀도를 향상시키는 것으로도 유명합니다.
  • 이 보드는 작동 온도를 손쉽게 낮출 수 있습니다.
  • 효과적인 열팽창은 제품의 수명을 연장시킵니다. 따라서 브랜드 이미지를 향상시킵니다.
  • 알루미늄 PCB 제조는 비용 효율적인 조립으로 인해 인기가 있습니다.
  • 하드웨어를 줄이는 데 도움이되므로 인쇄 회로 기판의 비용이 낮아집니다.
  • 그들의 기초는 일반적으로 세라믹 기초보다 강합니다. 베이스는 적절한 기계적 내구성과 뛰어난 절연성을 가지고 있습니다.

알루미늄 PCB 제조 회사 선택

알루미늄 인쇄 회로 기판은 안정적이고 효율적입니다. 그러나 보드의 품질은 제조업체에 따라 크게 달라집니다. 신뢰할 수있는 제조업체를 선택하면 고품질 인쇄 보드를 갖게됩니다.

Miracle BWB는 선도적 인 제조업체입니다. 그들은 모든 기복을 이해할만큼 충분히 오랫동안 사업을 해왔습니다. 제조업체는 제한된 시간 내에 효과적이고 고품질의 인쇄 회로 기판을 생성 할 수 있습니다.

그들은 숙련되고 구성 요소를 갖춘 사람들이 있기 때문에 선도적 인 알루미늄 PCB 제조업체입니다. 이 사람들은 전자 제품을위한 최고 수준의 안정적이고 효과적이며 효율적인 인쇄 회로 기판을 설계하고 개발하는 데 도움을 줄 것입니다.

Aluminum PCB manufacturing in china

멀리

알루미늄 인쇄 회로 기판은 성능 요인으로 인해 업계 최고의 기판입니다. 신뢰성이 높고 열전도율이 뛰어납니다. 제한된 열팽창으로 인해 SMT 전력 장치에 가장 적합한 선택입니다.

알루미늄 인쇄 회로 기판을 장치에 통합하면 성능이 향상 될뿐만 아니라 보관 수명도 늘어납니다. 유통 기한이 증가하고 효율적인 기능을 갖춘 신뢰할 수있는 제품은 결국 브랜드 이미지를 향상시키고 리드를 증가시킵니다.

따라서 인쇄 회로 기판 만 입니다. 결국 목표는 새로운 소비자를 유치 할뿐만 아니라 기존 소비자도 유지하는 것입니다.

email chevron up