الفرق بين ثنائي الفينيل متعدد الكلور أحادي الجانب ومزدوج ومتعدد الطبقات ثنائي الفينيل متعدد الكلور

ثنائي الفينيل متعدد الكلور أحادي الجانب مقابل مزدوج الوجه مقابل متعدد الطبقات ثنائي الفينيل متعدد الكلور    

تعد لوحات الدوائر المطبوعة جزءًا مهمًا من الإلكترونيات الحديثة. إن الشيء العظيم عنها متوفر في مجموعة واسعة من الأنواع والفئات الفرعية. على سبيل المثال ، أبسطها جميعًا هو PCB أحادي الجانب ، ثم لديك لوحة دوائر مطبوعة على الوجهين أو PCB متعدد الطبقات.

All these PCB types serve the basic purpose; however, they differ in terms of performance efficiency and density. Likewise, every PCB comes with different uses and price points. If you are planning to purchase a PCB for your equipment, you need to have an understanding of the basic three types.

Learn about their difference and how can they make an impact. In this blog post, we are going to talk about the basic three types of Printed Circuit Boards, their differences, advantages, and usage.

Single-Sided PCB Vs other Types of PCB

ثنائي الفينيل متعدد الكلور أحادي الجانب

Single-layer Printed Circuit Board, often known as the Single-Sided PCB is a Printed Circuit Board that consists of only one layer. The layer is made up of conducting material and is located on one side of the Printed Circuit Board.

On the other side of the board, the manufacturer accommodates different electronic components. Single-sided Printed Circuit Boards are highly cost-effective, especially when you do mass production. They are perfect for a wide variety of electronics.

However, clients often use Single-layer PCB when they are having a tight budget. In addition, the electronics do not require high-density board for smooth and seamless functionality.

Materials used for Single-Sided Board

There are several materials that manufacturers tend to use for Single layer PCB. For instance, they can use reinforced phenolic resin along with a copper foil. Or there is always the possibility of using Glass fiber reinforced epoxy resin along with copper foil, among many others.

نظرًا لأن تصميم وتصنيع لوحة الدوائر المطبوعة ليست معقدة على الإطلاق. لذلك ، فهي من بين أكثر مركبات ثنائي الفينيل متعدد الكلور شيوعًا لدى الشركة المصنعة وتصنعها. الغرض الرئيسي من ثنائي الفينيل متعدد الكلور أحادي الطبقة هو نفس الغرض من نظرائه.

ومع ذلك ، فإن قدرتها على التصنيع السريع والإنتاج الفعال من حيث التكلفة تجعلها شائعة بين العديد من الأجهزة الإلكترونية اليومية. بعض منهم ، قمنا بإدراجها أدناه.

• مراقبة
• طابعات
• محركات الحالة الصلبة
• حاسبات
• مزودات الطاقة
• معدات الصوت
• نظام الكاميرا ، من بين أمور أخرى.

مزايا اللوحات المطبوعة من جانب واحد

تكلفة التصنيع لثنائي الفينيل متعدد الكلور أحادي الجانب عالية التكلفة بسبب تصميمها الأساسي والبسيط. كما أن افتقارها إلى التعقيد يجعل من السهل فهمها لمجموعة متنوعة من الشركات المصنعة ، وبالتالي يمكنك العثور على العديد من الشركات المصنعة الموثوقة.

The lack of complexity reduces the error of chances at different manufacturing stages.

The higher the number of PCB units, the lesser the price.

Double-Sided Printed Circuit Boards

Single-sided PCB and Double-Sided PCB are similar, with just one major difference. Double-sided Printed Boards have two-sided traces instead of a single-sided board. There is a top and a bottom layer for a Printed Circuit Board.

With Double-Sided PCB, manufacturers have the facility of mounting components and conductive copper on both sides of the Printed Board instead of one, as was the case in a single-layer Printed Board. This means that manufacturers are able to achieve higher density without actually requiring a point to point soldering.

Nonetheless, the fabrication process of the double-sided Printed Board is more complex in comparison to the single-sided PCB. Despite the manufacturing complexity and increase in the price, we suggest using double-sided PCB for all the benefits it offers.

Material Used for Double-Sided PCB

Like Single-Sided PCB, Double-Sided Printed Circuit boards also come with a woven glass epoxy base. However, with Double-Sided PCB, you have a copper coating on both sides of the Printed Circuit Board. Also, it is possible to use varying copper thickness.

The thickness greatly depends upon the requirement of the intended equipment. Since they offer complexity without overburdening in terms of prices, therefore, they are becoming increasingly common.

A lot of applications incorporate Double-Sided PCB, we have listed some of them below.

• Phone Systems
• Industrial Control
• لوحات عدادات السيارة
• مكبرات الصوت
• آلات البيع
• أنظمة إضاءة LED

مزايا لوحة الدوائر المطبوعة على الوجهين

تحتوي الألواح على الوجهين على طبقة إضافية يضيف عليها المصنعون المكونات. وبالتالي ، زيادة كثافة الدائرة. مع وجود مساحة إضافية ، يمكن تركيب المزيد من الموصلات والمكونات.

تقدم هذه اللوحات تعقيدًا أكثر ؛ لذلك ، فهي مثالية للإلكترونيات الحديثة التي تتطلب لوحات الدوائر المطبوعة.

باستخدام ثنائي الفينيل متعدد الكلور ، تميل إلى وضع المكونات على جانبي اللوحة. وبالتالي ، تقليل المساحة مع زيادة الكفاءة.

لوحات الدوائر المطبوعة متعددة الطبقات

If you require extremely high-level circuit complexity, multilayer PCBs are the best option. They consist of more than three copper layers that are laminated together. Multi-layer Printed Boards are becoming imperative especially for electronics that require a high level of complexity.

Something which is not manageable with single-sided PCB or double-sided Printed Board.

Materials Used for Multi-Layer PCBs

The basic core materials for Multi-layer Printed Boards are the same as that of single and double-layered PCBs. However, there is a difference in the manufacturing process. After etching the initial core, they then have to prepreg it with an additional layer of soft fiberglass.

This helps is keeping the layers intact. This turns into the hard fiberglass once the board sent through the hot press. Thus, ensuring robustness and toughness of the PCB after the curing process. In the case of a 4-layer PCB, there will be 1 core, prepreg, and a copper foil layer on both the bottom as well as the top of the Printed Circuit Board.

A number of complex technologies greatly depend upon multi-layer Printed Boards for effective functionality and long-lasting performance. Below are some of these technologies.

• Atomic Accelerators
• Heart Monitors
• Space Equipment
• Scientific Equipment
• GPS systems
• Smartphones

يبعد

When it comes to fabricating your own وتصنيع لوحة الدوائر المطبوعة , it is important to understand the difference between the 3 basic types of Printed Boards. You also need to focus on your application requirement to choose the right PCB.

In case, you need help in deciding the type of PCB that would go with your application, reach out to our professional and they will guide in the best possible way.