Gold Finger PCB2020-03-01
Comprehensive Gold Finger PCB manufacturing services
For more than 10 years we have been offering our customers flawless Gold Finger pcb manufacturing services according to their needs.
Miracle Technology provides PCB, PWB, printed circuit board, flexible and rigid board, aluminum substrate, flexible circuit board and other circuit board PCB. Committed to the comprehensive quality system, and passed the ISO9001 certificate issued by an international certification body, and actively implement the quality system to put the spirit of the provisions into the field operation.
What is Gold Finger PCB?
It refers to a terminal that is plated by gold and is a part of a card edge connector. Usually fingers constitute flash gold. This thickness saves them from the bad effects of plugging and unplugging many times. Electroplated Gold serves as a contact for the edge connector where PCBs have to be installed and removed repeatedly. Gold finger printed circuit board provides protection from wear and tear to the edge connector. If gold is electroplated correctly and sufficiently, we can expect them to work efficiently upto 1000 cycles before repairing.
What is PCB Gold Finger Bevelling?
PCB gold finger plating is a symmetrical process and involves three steps. Steps are following:
- Nickel Plating
Firstly, edges of the connector receive the layer of Nickel that is 2 to 6 microns in thickness.
- Gold plating
In this step 1 to 2 microns of hard gold is electroplated above the layer of Nickel.
Here, the ends of the connector receive a tapering at a certain angle that varies from 30 to 45 degrees.
|Gold Finger PCB|
|Recuento de capas||6|
|Espesor del tablero terminado (mm)||0,8 mm|
|Min. Diámetro del orificio terminado (mm)||0,3 mm|
|Min. ancho de línea / espaciado (mm)||0.15/0.15mm|
|Tratamiento de superficies||DE ACUERDO|
|Función clave||Long and short gold finger & step routing slot|
Why Choose Gold Finger PCB?
Following are some reasons why Gold Finger PCB is preferred to use.
- PCB is connected to the motherboard, but it should be easy to be replaced as well. Gold Fingers printed circuit board make it comfortable with this role upto maximum limit.
- Gold is a metal that has good conductivity and is also resistant to oxidation by almost all the oxidizing agents.
Qualities of Gold Finger In PCB
- They must be hard enough to meet the friction applied during the insertion into the connector.
- They must have a flat surface so that there is no problem during the insertion.
- Also, they are good conductors which makes the strong connection possible.
Gold Finger PCB Types
- Regular Golden Finger PCB
In this type of golden fingers, PCB has the edge of the plate that has the stack of rectangular pads. These pad have same length and width.
- Long and Short Golden Finger PCB
This type of golden finger has the plate that has a rectangular pad of multiple length at the corner.
- Segmented Golden Finger PCB
Here a rectangular pad connects to the edge of the plate but the front section disconnects.
Why Gold Plating is important For Gold Finger PCBs
The electroplating with gold provides the strength and durability to the contact point. Well, there is a big and solid reason behind the usage of gold. Gold select for this purpose because:
- It is resistant to oxidation
- It provides good conductivity
- Moreover it can alloy with other metals to enhance strength
When you scan a document or print an article, motherboard is unable to receive the signals from the other devices until PCB helps to let it so. It means Gold Finger PCB has proved its significance and resourcefulness to the industry. It has become the part and parcel of the mobile and computer devices of the industry.
Why Miracle Technology?
“CUSTOMER SATISFACTION IS OUR JOY AT WORK.”
As one of the leading PCB manufacturers in china, In addition to comprehensive quality control, safety in use is also very important. We have an integrated business philosophy that focus on following core points:
- efficiency and innovation
We offer our services nationwide. Our some biggest clients are in South Korea, United Stated of America, Japan, China and Germany.
Siguiente: PCB de cerámica