Casa/ Blog/ Consejos para elegir el fabricante de PCB adecuado en 2020

Consejos para elegir el fabricante de PCB adecuado en 2020

2020-05-25

Guide to PCB Design: How to Choose PCB Manufacturer

Finding a PCB manufacturer might be a challenging task, especially if you are an amateur. Your limited knowledge may not guide you in the best possible way. Thus, leading to additional problems. After all, Printed Circuit Boards are the heart of every electronics.

A low quality, unreliable printed circuit board will have a direct impact on the quality and efficiency of your product. So, it is important for you to choose only the PCB supplier.

By the by, this by no means is a comprehensive list of the low- or high-quality manufacturers. We do not plant talk about the quality of any manufacturer. On the contrary, we are going to provide you with some effective tips.

These tips would help you make a better decision when choosing a PCB manufacturer. So, without any further delay, let us focus on the tips below.

Tips for Choosing the Right PCB Manufacturer                         PCB Manufacturer      

Printed Circuit Board Quality

Of course, when buying a Printed Circuit Board for your electronics, the first thing that you need to focus on is quality. Only a high-quality PCB can assure reliable and better-performing electronics.

El término "calidad" tiene un significado abstracto en la industria de las placas de circuito impreso. Hay varios aspectos que entran dentro de la calidad. Por lo tanto, un fabricante que se tranquilice para producir placas de circuito impreso de alta calidad, debe centrarse en todos estos aspectos y no solo en uno.

La calidad de PCB se centra en diferentes aspectos. Estos son algunos de estos aspectos:

  • La placa de circuito impreso borra la prueba de placa desnuda
  • Los agujeros se perforan y colocan con precisión.
  • El tablero debe tener las dimensiones adecuadas según la demanda del consumidor.
  • Envoltura mínima de la placa. Sin embargo, esto depende principalmente del diseño de la placa.
  • Muchos otros aspectos.

A Manufacturer should retain the quality for every batch. Delivering high-quality order for the main order and then deteriorating the quality would be highly unprofessional. It would not only damage the manufacturer’s image but at the same time, have an adverse impact on the consumer’s brand.

Therefore, it is imperative for the quality to remain high consistently. These kinds of mistakes can endanger the Printed Circuit Board assembly that can then lead to troubled electronics. Consistently bad manufacturing will eventually hurt the empresa de fabricación de PCB se .

Una buena forma de ver si el fabricante ofrece calidad es llegar a sus antiguos clientes. Además, puede preguntar a las empresas que no compiten sobre un fabricante de PCB en particular. Esto proporcionaría el tipo de información adecuado para tomar la decisión correcta.

Costo de fabricación de la placa de circuito impreso

Es posible que haya encontrado placas de circuito impreso que ofrecen un costo extremadamente bajo. Podrías considerarlos. Sin embargo, tenga en cuenta que el costo extremadamente bajo generalmente es el resultado de una calidad comprometida.

Un fabricante de PCB confiable no ofrecería un costo más allá de lo creíble. Además, nunca comprometerían la calidad. Cobrarían solo lo requerido. Le cobrarían menos conservando la calidad de la placa de circuito impreso.

Therefore, do not focus on the low cost too much. After all, the joy of low cost is overcome by the sorrow of poor quality. Just reach out to a Printed Circuit Board manufacturer who can balance between the quality and cost.

 Requirement Fulfilling Ability

This is an interesting aspect especially if your product requires sophisticated and complex Printed Circuit Boards. Not all manufacturers have the ability to produce high-end, sophisticated Printed Circuit Boards.

Yes, all would claim that they have the capabilities, but sadly not all would fulfill their promise. So, make sure that the manufacturer is able to accept the file in the format. This generally isn’t a big problem because the formats are standard.

No obstante, debería poder producir ese tablero según los requisitos del consumidor. El tablero debe tener el número deseado de capas, el sustrato debe ser del material solicitado entre otros. Una buena idea es ejecutar la placa de circuito impresotravés de una lista de verificación. Esto ayudaría a garantizar que se ajusta a las demandas del consumidor.

Evite los corredores

Los corredores son reales y varias empresas en línea se acercan a ellos. En caso de que se esté preguntando qué es un corredor, permítanos explicárselo. Un corredor es alguien que toma una orden de usted y luego se la pasa a otra persona.

Principalmente porque el corredor no tiene la capacidad para desarrollar o producir el producto. Entonces, estarían en la parte delantera y alguien desconocido estaría trabajando en el otro extremo.

The main problem with these kind arrangements is that these brokers do not guarantee quality. They are reaching out to different manufacturers at one time and you might have got the same consistency throughout your batches.

Nonetheless, there are certain good brokers as well. If you find one, you are lucky as it would cost you quite less. Provided, you find one, which is very tricky. So, reaching out directly to the manufacturer is a better and reliable option.

Custom Relationship

Only if a PCB manufacturer concerned about their client’s feedback and relationship, will it be able to come up with quality work? After all, their main objective would be to develop a long-lasting relationship with the consumer.

In addition, the coordination between the Printed Circuit Board manufacturer and the client would eliminate communication problems. Both the PCB manufacturer and the consumer would have a clear understanding of the progress and specification of the in-process Printed Circuit Board.

Timescales

In case, you do not have any specific deadline, it would be easy for you to reach out to a company that charges less, but take more time. However, in case, you have to meet a deadline, then finding the best PCB supplier will be challenging.

After all, you would want someone who is cost-efficient, delivers high-quality Printed Circuit Boards, and are able to meet the deadlines.

Una forma de averiguarlo es si una PCB en particular puede entregar un producto de calidad a tiempo es contactar a sus clientes anteriores. Podrían brindarle experiencia de primera mano sobre lo bueno que es un fabricante en particular para cumplir sus promesas.

Abastecimiento de material

Es posible que esté pensando, ¿por qué necesita aprender sobre su fuente material? Puede parecer irrelevante, pero es extremadamente importante. Recuerde, el material que usan tendría un impacto directo en la calidad de su placa de circuito impreso.

Por lo tanto, debe asegurarse de que el fabricante esté utilizando el mejor material posible para su placa de circuito impreso. Los proveedores de la materia prima deben consultar.

Pruebas

Sin las pruebas adecuadas, nunca estará seguro de la calidad de la placa de circuito impreso. Asegúrese de que el fabricante con el que se comunique tenga una forma interna o de cualquier otra forma de probar las placas de circuito impreso.

Solo si una empresa prueba sus productos, podrá entregar piezas de calidad.

Estado del arte de la tecnología

Cuando todo se mueve tan rápido, es importante que la empresa de fabricación de PCB se actualice. Con la creciente demanda de sofisticadas placas de circuito impreso, los fabricantes necesitan actualizar sus equipos.

La tecnología moderna les permitiría crear placas de circuito impreso que pudieran satisfacer la demanda de la electrónica actual.

PCB Manufacturer in china

Para llevar

We understand that selecting a PCB manufacturer is not an easy task. However, if you focus on the key factors including reputation, equipment, customer relationship, etc. you will be able to make the right decision.

Miracle-P-WB is among the leading placa de circuito impreso Manufacturers. They have state of the art technology and they deliver high-quality PCBs within limited time and budget. You can reach out to them:

Phone: +86-755-85246345

Email: info@miraclepwb.com

email chevron up