email อีเมล:  Info@miraclepwb.com
call โทรศัพท์:  + 86-755-85246345
search icon
บ้าน/ บล็อก/ บริการประกอบ PCB บอร์ด Miraclepwb พร้อม E-test 100%

บริการประกอบ PCB บอร์ด Miraclepwb พร้อม E-test 100%

2020-06-02

บริการประกอบ PCB แบบครบวงจร Miraclepwb Board พร้อมทดสอบ E-test 2020 100%

เราสามารถจัดหา 1 ชิ้นสำหรับติดตั้งแผงวงจรพิมพ์ เพื่อการดำเนินงานในระยะยาวอย่างสม่ำเสมอตลอดจนช่วยคุณจัดเรียงคำสั่งซื้อและชิ้นส่วน (ส่วนประกอบที่ใช้กันอย่างแพร่หลายในคลังสินค้าของเรา) และการดำเนินการให้เสร็จสิ้น

pcb assembly

เทคโนโลยีการติดตั้งที่ครอบคลุมช่วยให้เราสามารถแผงวงจรพิมพ์เกือบทุกความซับซ้อน

การสนับสนุนทางเทคนิคและการให้คำปรึกษาจากผู้เชี่ยวชาญของเราคือชุดบริการที่เราพร้อมให้บริการแก่ผู้เชี่ยวชาญด้านการสั่งซื้อ

You can pass on to us the order of their organization and time cost, and in the development of a single account “product” in Banliu, which includes the production of printed circuit boards, packaging and installation.

All of this allows you to apply and receive orders without leaving the office. As an intermediary, we provide each customer with interesting and favorable working conditions.

Our equipment allows you to perform:

ส่วนประกอบ SMD ที่มีขนาดตั้งแต่ 0201 ถึง 50x50 มม. จะถูกติดตั้งโดยอัตโนมัติ
ติดตั้งส่วนประกอบ SMD ด้วยตนเอง
ชุดขายึด
การติดตั้งส่วนประกอบ SMD และพินแบบผสม
ใช้สำหรับการติดตั้งบอร์ดที่ยืดหยุ่นและแข็ง
ติดตั้งบนทรัมเป็ตแผ่นอลูมิเนียม
การติดตั้งบอร์ดไมโครเวฟ
ใช้วัสดุที่ไม่ต้องซักในการติดตั้ง (หลีกเลี่ยงการซัก)
นอกจากนี้เราดำเนินการ:

สร้างเทมเพลตสำหรับใช้วางประสาน
ทำความสะอาดคราบฟลักซ์บนบอร์ดหลังการติดตั้ง (มีหรือไม่มีอัลตราซาวนด์)
เคลือบป้องกันความชื้น
การตรวจเอ็กซ์เรย์ของรอยเชื่อม
บอร์ดควบคุม AOI
ในกระบวนการผลิตจะใช้วัสดุต่อไปนี้:

Solder paste indium NC-SMQ92H;
Henkel X3312i manual flux;
The washing liquid “Ultraklin” produced by JSC “Dipol-Technology”;
Moisture-proof coating Cramolin urethane, Cramolin plastic, DowCorning DC-1-2577.

  • technical skills
  • ข้อกำหนดการออกแบบ
  • Price, terms, delivery
  • How to place an order and install
  • How to order molds
  • quality
  • device

ทักษะทางเทคนิค pcb

Three SMD installation lines (MY100-2 line, MY9-1 line) based on the Mycronic high-precision automatic installation program enable you to install most of the existing components (chip, BGA, QFP, SOP, SOJ, PLCC, FlipChip) And components with 0.1mm ball end step, up to 50 x 50 mm BGA chip. According to IPC 9850, the repeatability of component installation is 45 microns per 3 sigma. The orientation accuracy of the component is 0.05 degrees

สายการผลิตประกอบด้วยเตาอบอุโมงค์สายพานลำเลียงเจ็ดโซนของ Heller ที่มีการพาความร้อนแบบบังคับและการควบคุมอุณหภูมิในทุกพื้นที่ทั้งด้านบนและด้านล่าง Heller Furnaces ช่วยให้คุณได้รับโปรไฟล์ reflow ที่แนะนำโดยผู้ผลิตวัสดุ

pcb technical skills

ข้อกำหนดการออกแบบ

1. ข้อกำหนดทั่วไปสำหรับแผงวงจรพิมพ์และมิเตอร์
1.1. ทรัมเป็ตบอร์ดพิมพ์ที่ต้องการมีส่วนประกอบ SMD ที่ด้านหนึ่ง
1.2. เมื่อวางส่วนประกอบบนแผงวงจรพิมพ์ขอแนะนำให้วางส่วนประกอบที่ใหญ่กว่าไว้ที่ด้านใดด้านหนึ่ง (ไมโครวงจรทรานซิสเตอร์ในกล่องหุ้ม DPAK ตัวเก็บประจุด้วยไฟฟ้าโช้กขนาดใหญ่ออปโตคัปเปลอร์ ฯลฯ )
1.3. ต้องใช้หน้ากากประสานบนแผงวงจรพิมพ์
1.4. ต้องมีหน้ากากประสานระหว่างขั้วของไมโครเซอร์กิต (ยกเว้นเมื่อช่องว่างระหว่างขั้วเล็กกว่าความกว้างต่ำสุดของหน้ากาก)
1.5. ไม่ควรมีช่องเปิดบนแผ่นของหมุด SMD ช่องเปิดทั้งหมดที่อยู่ใกล้กับไซต์ควรปิดด้วยหน้ากาก สิ่งนี้ทำเพื่อป้องกันไม่ให้โลหะบัดกรีไหลออกจากรู
1.6. There should be no vias or conductors not covered by solder resist under the SMD assembly.
1.7. All jumpers between the pads under the SMD microcircuit should be outside the solder area.
1.8. The same conclusion pads for non-output microcircuits (for example, in QFN and details) should be the same.
It is impossible to build different platforms for the same conclusion.

1.9. เครื่องหมายต้องไม่ข้ามพื้นที่นี้และจะต้องอยู่ในพื้นที่เชื่อม
1.10. การ์ดที่ใช้สำหรับการติดตั้ง SMD และแผงวงจรพิมพ์ต้องเป็นไปตามข้อกำหนดในหัวข้อที่ 2
2. ข้อกำหนดสำหรับแผงวงจรพิมพ์ที่ติดตั้งโดยอัตโนมัติ
2.1. แผงวงจรพิมพ์ต้องมีขนาดเป็นรูปสี่เหลี่ยมผืนผ้า
2.2. หาก PCB ไม่ใช่รูปสี่เหลี่ยมผืนผ้าก็ควรอยู่ในกรอบ Framework เป็นฟิลด์ทางเทคนิค
ทำให้ขั้นตอนการติดตั้งแผงวงจรพิมพ์ในเครื่องพิมพ์ออโตมาตาและเตา reflow ง่ายขึ้น
ส่วนนำของเฟรมจะเปลี่ยนเทมเพลตให้เป็นรูปสี่เหลี่ยมผืนผ้า
2.3. ความกว้างของช่องทางเทคนิคคือ 5 มม. ทำเครื่องหมายไว้ที่มุม
2.4. The components of the printed circuit board are set on the edge board smaller than 7 mm. The technical field must be equipped at least on the side that violates the “7 mm rule”.
2.5. The size of the printed circuit board is smaller than 100*100 mm. Must be collected in the panel.
2.6. The size of the printed circuit board is larger than 100×100 mm. Also want to be integrated in the panel.
2.7. The maximum size of the panel is 200 * 255mm. (Under special circumstances, more things can be done, but an agreement must be reached with us.)
2.8. Printed circuit board sales exceeded 100 pieces. It must be integrated into the panel to make its size close to the maximum.
2.9. On each board, e (even in the preform), it is desirable that the reference points (hereinafter referred to as RH) are arranged diagonally to each other on the diagonal printed circuit board s at the maximum distance, but when flipping the board s at the 180° position At this time, at least 2 RH should be overlapped. Mm (on one of the axes).
2.10. If it is impossible to make the internal RE board trumpet they are placed in the technical field.
2.11. Design of reference signs. There are two types of reference marks: round and square. The circle diagram is shown below. Squares are made in the same way, but instead of inner circles, squares with sides of 1-2 mm are made.
Panelization (or multiplexing) makes the processability of printed circuit boards higher. Significantly reduces the time required to clean the solder paste and install the board in the installer. Through cleaning, Panelize improves the cleaning effect, because it can correctly fix the cleaning effect of the printed circuit board without reducing the performance.
The panel in the printed circuit board assembled in STP.PAUR.07-2015 is given in the regular circuit board for forming the printed panel.
3. Full set of automatic installation requirements.
3.1. Components should be placed in factory packaging (molds (pallets), sticks (tubes), tape).
3.2. Bulk components are not allowed.
3.3. Do not cut the tape into small pieces.
3.4. ไม่อนุญาตให้ใช้เทปกาวม้วนเทปและลวดเย็บกระดาษ สิ่งแปลกปลอมเหล่านี้อาจทำให้เกิดความเสียหายกับชิ้นส่วนที่เคลื่อนไหวของตัวติดตั้ง
3.5. ยกเว้นชิ้นส่วนที่มีราคาแพงเงินมัดจำของชิ้นส่วนทั้งหมดควรเป็น 3% ของปริมาณที่ต้องการ แต่ไม่น้อยกว่า 10 ชิ้น
3.6. ยกเว้นส่วนประกอบที่มีราคาแพงและหายากความยาวเทปขั้นต่ำของเทปทั้งหมด:
สำหรับส่วนประกอบในเทปเพิ่มขึ้นทีละ 2 มม. (ตัวอย่างเช่นชิป 0402 ซึ่งมีส่วนประกอบสองส่วนระหว่างการเจาะสองชิ้น) ความยาวขั้นต่ำของเทปคือ 50 ชิ้น
สำหรับส่วนประกอบในเทปเพิ่มขึ้นครั้งละ 4 มม. (ตัวอย่างเช่นชิป 0603, 0805 มีเพียงส่วนประกอบเดียวในการเจาะแต่ละครั้ง) ความยาวเทปขั้นต่ำคือ 25
3.7. หากชื่อของส่วนประกอบแตกต่างจากชื่อที่ระบุในข้อกำหนดควรมีข้อมูลเกี่ยวกับการแทนที่ที่ถูกต้อง หมายเหตุในรูปแบบใด ๆ ข้อกำหนดเพียงอย่างเดียวคือข้อมูลควรมีความชัดเจนโดยอ้างอิงถึงลูกค้าคำสั่งซื้อส่วนประกอบและวันที่ เพื่อประโยชน์ของลูกไก่และนักแสดงให้ดำเนินการตามย่อหน้านี้

เกี่ยวกับค่าใช้จ่ายในการติดตั้งแผงวงจรพิมพ์
ตามใบสั่งซื้อเอกสารการออกแบบจำนวนแผงวงจรพิมพ์ที่จะแจกจ่ายโครงสร้างและลักษณะทางเทคนิคของแผงวงจรพิมพ์และส่วนประกอบราคาของแผงวงจรพิมพ์เพื่อติดตั้ง ส่วนประกอบคำนวณตามปริมาณการกระจาย

ปัจจัยหลักที่มีผลต่อต้นทุนการติดตั้ง:

The แผงวงจรพิมพ์ and configuration meet the design requirements (reducing installation costs);
Reference marks exist during automatic installation of SMD components (reduced installation costs);
The existence of the template and the application of solder paste (reduced installation costs);
Double-sided or double-sided installation of printed circuit boards (double-sided installation is cheaper);
Main order or repeat order (installation cost of the following repeat custom goods);
The area of ​​the แผงวงจรพิมพ์ (the cost from the square board depends on cleaning, moisture-proof and packaging);
Manual welding of SMD components (cost is higher than automatic installation).
Our manager will help you determine the exact cost of installation and other services. The prerequisite for calculating the cost is to fill in the installation request.
The application form is located in the “How to Place an Order to Install” section.

delivery time

Due to the fact that the exact date order of execution and depends on many factors, they are not always easy to determine.
Main factors affecting installation time:
Whether there are all the components ordered (some missing components usually increase the installation time of the printed circuit board);
Whether the แผงวงจรพิมพ์ and configuration meet the design requirements (reduced installation time);
Installation on the machine or manual installation (automatic installation reduces installation time);
The presence of automatic installation reference marks (reduced installation time);
The order of the timeliness board S” and the printed circuit board of the component (after the 100% fee before the start of installation);
Loading production line;
The complexity of output control.
Experience shows that when ordering the installation of 1 to 500 medium-complexity printed circuit boards, under normal production line loading, the delivery time of order a does not exceed 2 weeks.
With a larger number of orders, and may be issued in part, it is convenient for you.
delivery
In Russia, the product is delivered to the destination agreed by the buyer, and the freight is paid by the buyer.

The limited liability company “Sant” signs a transportation expedition contract with the freight company selected under normal circumstances.
Deliver a batch of products to the destination specified in the “Delivery” line requested by the buyer.
If the buyer does not agree with the proposed delivery terms, he has the right to enter into an agreement with another freight company or pick up the goods on his behalf. In addition, all costs and risks associated with this transportation are borne by the buyer. Sant LLC’s obligation to transfer a batch of products to the buyer is deemed fulfilled when the transshipment company ships the batch of products, or directly transfers the batch of products to the buyer at the supplier’s location (collection).

email chevron up