email 이메일 :  Info@miraclepwb.com
call 전화 :  + 86-755-85246345
search icon
/ 블로그/ 알루미늄 PCB 제조업체가 가정 장식에 어떻게 도움을 줄 수 있습니까?

알루미늄 PCB 제조업체가 가정 장식에 어떻게 도움을 줄 수 있습니까?

2020-06-23

알루미늄 기반 LED 설치를위한 초보자 가이드

aluminum pcb manufacturer in china

LED 스트립에 대한 알루미늄 PCB 제조업체의 중요한 특성은 무엇입니까?

To help you choose the led 스트립 몇 가지 속성은 다음과 같습니다.

LED의 유형

1m 실리콘 스트립을 제외하고 모든 LED 스트립에는 SMD LED. 작고 매우 평평하여 많은 응용 분야에서 사용할 수 있습니다.

미터당 LED 수

The more LEDs you have per meter, the more powerful the lighting will be. Since the gap between each LED will be reduced. An LED strip with a large number of LEDs will however consume more.

For example, a strip equipped with 240 LEDs per meter will consume 24 watts per meter. Unlike a strip of 60 LEDs , which will consume 4.8 watts per meter.

Voltage

The vast majority of aluminum pcb manufacturer tapes operate on low voltage, 12 volts. This allows you to adapt it to all your projects without electrical risk. The choice on tapes, accessories, controllers and dimmers is also more important in 12V. To feed them, you can use:

  • a 220V / 12 power supply
  • a battery box
  • a rechargeable battery

We have created many ready-to-use kits for each of these power supplies.

Consumption in watts per meter

Depending on the type of tape, you will not have the same consumption. This is why on the product sheet; you will find the consumption in watts per meter. This will allow you to associate the right power supply

알루미늄 PCB 제조업체Sealing:

This data is expressed with 2 digits following the prefix IP. The first number is for protection against solids and the second for water intrusion.

A non-waterproof led strip is made of IP20. 알루미늄 PCB 제조업체cannot install it in a humid environment or outdoors. Because it does not support any projection of water. They are protected against dust and water spray from all directions.

What power supply for a LED strip?

Consult the aluminum pcb manufacturer to know what power supply you need. Furthermore, he can suggest you the type of pcb length.

How to cut an LED strip?

If you want to adjust the length of your led strip, you can cut it. To know where to cut exactly on the strip, you just need to locate the cut line between the copper studs. You will find them over the entire length of the luminaire at regular intervals:

How to connect an LED strip?

You installed your led strip but you did not use the entire length of the light? No problem, the falls and the cut parts can reconnect electrically. Similarly, luminum pcb manufacturer offers a range of quick connectors for RGB led strip.

These connectors are very simple to use. The connection is super fast and requires no soldering.

어떻게 알루미늄 PCB 제조업체를 수행 하는 LED 스트립 솔더?

두 개의 LED 스트립을 납땜하기에 따라  t 자신의 튜토리얼을. 퀵 커넥터 사용과 납땜 중에서 선택할 수있는 경우 납땜을 권장합니다.

연결이 더 좋고 견고하기 때문에 실제로 가장 안전한 솔루션입니다. 또한이 솔루션은 스트립을 넓 히지 않는 장점이 있습니다. 또한 여전히 프로필을 사용할 수 있습니다.

예를 들어 의상의 실현을 위해서는 불가피합니다.

LED 스트립을 붙이는 방법?

알루미늄 PCB 제조업체 는 먼저 표면을 철저히 청소해야합니다. 그럼 아주 쉽습니다. 그는 접착 테이프에서 보호를 제거하고 원하는 곳에 붙이면됩니다.

대부분의 LED 스트립에는 자체 접착식 뒷면이 장착되어 있습니다.

LED 스트립이 벗겨지면 어떻게해야합니까?

LED 테이프를 구입하기 전에 스티커 뒷면이 3M 브랜드인지 확인하십시오. 많은 위조품이 시장에 넘쳐납니다. 알루미늄 PCB 제조업체 LED 스트립에는 실제 3M 접착제가 있습니다.

이 접착제는 다음에 대한 내성이 우수합니다.

  • 습기
  • UV
  • 그리고 알루미늄을 완벽하게 잡으십시오.

그런 다음 LED 테이프가 빠지지 않도록 설치 지원을 철저히 청소해야합니다. 표면을 잘 먼지를 제거하고 탈지 한 다음 LED 테이프를 설치하십시오.

또 다른 대안은 알루미늄 프로파일을 사용하는 것입니다. 또한 내부에 LED 스트립을 통합하는 측면에서 완벽한 솔루션을 제공한다는 장점이 있습니다. 프로파일을 사용하면 테이프의 열이 더 잘 분산됩니다. 또한 먼지로부터 보호됩니다.

철 지지대에 LED 스트립을 고정하는 방법은 무엇입니까?

To install your flexible tape on a body or a household appliance use a magnetic strip. The advantage is that you can put on and take off your luminaries as many times as you want without damaging your support.

Which LED strip for the kitchen and the worktop?

First of all, you have to determine what is your choice? Indeed, if you opt for decorative lighting, it is better to turn to a warm white. While a cool white will be better suited to functional lighting. Line light

However, if you want to use the two shades of white. A mixture of warm white and cool white is recommended by 알루미늄 PCB 제조업체.

In both cases, 알루미늄 PCB 제조업체 advise you to choose waterproof led strips. It will prevent any deterioration in the event of contact with a liquid.

따뜻한 흰색 방수 LED 리본 키트를 둘러 보는 것을 망설이지 마십시오. 모든 알루미늄 PCB 제조업체  led 스트립에는 자체 접착 백이 있습니다. 원하는 곳에 붙이기 만하면됩니다.

잘못된 천장을위한 어떤 LED 스트립?

천장에 관한 한 간접 조명이 선호되는 경우가 많습니다. 색상면에서 무엇이든 가능합니다. 방을 비추는 차가운 흰색. 따뜻한 흰색으로 아늑한 분위기를 제공합니다.

거실, 침실 또는 복도와 같이 방이 습기에 매우 취약하지 않은 경우. 비 방수 LED 스트립을 매우 잘 선택할 수 있습니다. 반면에 욕실 조명 프로젝트가있는 경우 방수 LED 스트립을 사용해야합니다.

거실 용 LED 스트립은 무엇입니까? 알루미늄 PCB 제조업체 권장 사항

The same question arises for each room in the house. Do you want mood lighting or useful lighting?

PCB and PCBA services

In the first case, for mood lighting to bring a “cozy” touch to the room. Warm white is preferable. In the second case, to serve as lighting for the room, the cool white will be more suitable.

However, you can very well play with the two shades of white thanks to aluminum pcb manufacturer. Which combine both cold white LEDs and warm white LEDs. The remote control supplied in the kit allows you to adjust the shade of white.

If you want to bring a festive touch to your room, why not vary the colors according to the ambient music? In this case choose a LED strip with color change, called “RGB” with a sound sensor.

Our LED strips have a self-adhesive back; you just have to peel off the protective film in order to stick them wherever you want.

Which LED strip for an aquarium?

For an aquarium, of course, a waterproof LED tape is required. Very often, cold white is preferred to warm white. Since it is a question of lighting the aquarium, it offers a very pretty visual rendering. Aluminum pcb manufacturer recommend that you choose a LED strip for high power.

The “classic” led strip is not the only solution. Therefore, you can also opt for a neon led strip. Another advantage, there is no “dots” effect as can be found on a classic led strip. It therefore provides a continuous and harmonious light over the entire length.

email chevron up