Casa / Blog / come avviare un'attività di produzione di circuiti stampati

come avviare un'attività di produzione di circuiti stampati

2020-08-08

come avviare un'attività di produzione di circuiti stampati

La creazione di qualsiasi apparecchiatura informatica senza un circuito stampato è impossibile. Pertanto, nel mondo moderno, la produzione di circuiti stampati è una delle industrie più redditizie. Inoltre, la tecnologia in sé non è difficile. Alcuni artigiani possono persino produrre circuiti stampati a casa.

how to start a pcb manufacturing business

soddisfare:

  • Locali e dipendenti
  • attrezzature
  • Tecnologia di produzione
  • Materiali
  • Processo di produzione
  • test del prodotto
  • Turnover

Locali e dipendenti

Any manufacturer of electronic products values the circuit boards assembled in the factory, but for this kind of production organization, you need a room and sufficient personnel. Room requirements:

Minimum area -80 m 2;
Electricity exists in three-phase 380V;
Special sewers where the liquid mixture will leave the chemical stage of production;
Industrial hood
Water supply
Compressed air circulation.

It is best to equip this type of production in an industrial zone. Without knowledge, it is difficult to organize such a business, and it can only be done in the form of co-investment. Therefore, experts are needed in the staff. In the initial stages of small-scale production, you will need:

Generalist operators supervising the manufacturing process of printed circuit boards-4 people;
Quality control specialist
Director of Operations;
Handyman: porters, cleaners, if necessary, these experts can be hired according to the employment contract

You will also need a marketing staff, accountant, and secretary. In the light production of these positions, you can also find employees according to the contract.
As the business expands, the number of employees can increase.

attrezzature

Start-up equipment required to start production of printed circuit boards:

1、Part of processing. They are used in the preparation phase of the dielectric board. This includes: cutting, drilling, CNC milling machine, fixing.
2、Pressing equipment for producing foil coatings and pressing of multilayer printing boards.
3、Wet process equipment. Device for chemical cleaning, copper plating, developing, galvanizing, and oxidation. Equipment for mounting and manufacturing conductive circuits on dielectric boards.
4、The final coating. Equipment for hot tinning and preliminary and final cleaning of boards.
5、Printed circuit board laminating equipment.

Tecnologia di produzione

Manufacturing technology includes two main methods:

1 、 additivo. I binari sono montati sulla superficie dielettrica in modi diversi.
2 、 Sottrazione. Questa è la tecnologia di stiratura laser e tutte le sue modifiche. Il toner sulla stampante laser può proteggere le tracce future sul pannello in fibra di vetro. Tutte le sostanze in eccesso vengono scaricate con cloruro ferrico.

Possono essere utilizzati anche metodi di combinazione. In questo processo, a volte anche una parte del rivestimento conduttivo viene rimossa immediatamente dopo l'applicazione, ma alla fine, questo è un metodo più semplice ed economico rispetto alle tecniche sottrattive pure.

Materiali

A seconda del tipo di circuito stampato da produrre, sono necessari i seguenti materiali:

Lamina di fibra di vetro;
Getinax sventato;
Pellicola dielettrica per sigillare l'installazione.
I seguenti sono dielettrici:

Fluoroplastic board
Laminate on a metal substrate;
Polyimide film.
The thickness of the glass fiber for standard applications is 0.5 to 3 mm.

Processo di produzione

Algorithms for manufacturing printed circuit boards:

1、In the first stage, a blank is formed. It is necessary to cut the shape on the equipment and prepare the aluminum foil, and then apply it to the cut out work piece.
2、Draw a diagram of the circuit board conductors. This is the most labor-intensive production process and requires the greatest investment.
3、Plating PCB holes.
4、Press the plate to print.
5、coating.
6、Component installation.

At each stage, the exact compliance with the technology must be monitored in order to obtain a high-quality product.

pcb manufacturing business

test del prodotto
The most common methods are electrical and optical testing. When electrical testing is used, the overall continuity of the circuit and whether there is a short circuit will be checked.

In the optical test, the product will be checked for mechanical defects. During the optical test, warpage, wrong fastening components, insufficient or excessive welding material will be detected. Due to the complexity of production and insufficient personnel qualifications, errors often occur, especially in the early stages.

Turnover
You can sell the products produced by the company to various companies:

Used in the automotive industry;
Used in medical equipment;
Companies related to the production of computer equipment;
measuring instrument;
Large and small household appliances.
The average payback period of such a production line is 1-2 years. Starting capital-at least $75,000. If you plan to expand further, you can start with $50,000, but in this case, you must first devote all your income to development.

La produzione di circuiti stampati non è l'opzione commerciale più semplice. Tuttavia, ripagherà sempre, a condizione che la stretta aderenza alla tecnologia sia sufficiente per organizzare l'intero processo in modo competente. Un fattore importante sono i professionisti. Il capitale iniziale per questo tipo di produzione dovrebbe essere impressionante, perché l'attrezzatura di alta qualità utilizzata per produrre circuiti stampati in tutte le fasi è molto costosa. Innanzitutto, sono necessari circa $ 50.000 per organizzare da zero un'attività di successo in questa categoria.

email chevron up